Avery Dennison AP5.4 Gen II User Manual

04/10 Version 5.05-00 USER MANUALAP 5.4 – AP 5.6SetupChoosing the Materials ... 2Label Material ...

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.610AP5.4/AP5.6 Dispenser1. Inserting the label material, see Inserting a label roll  on page 6.2

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.611Inserting Ribbon¯ Ribbon only has to be inserted for thermal transfer printing.Inserting a New

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.612Replacing the Ribbon Roll1. Open the pressure lever on the printhead.2. Remove the wound roll

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.613When the Roll is EmptyEnd of MaterialAfter the end of the material roll passes by the punch se

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.614SettingsMechanic settingsRibbon brake (AP5.6)[5] Adjusting knob at the ribbon mandrelsA Settin

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.615Printhead pressure In some cases, the blackness of the printout is not sufficient with the sta

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.6162. Make a test printout and check the evenness of the printed results. If the printing intensi

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.617Material Parameters Using the following three parameters, you can enter the properties of the

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.618Parameters for Re-winding Mode¯ Setting only for AP 5.4/AP 5.6 “basic” dispenser and for AP 5.

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.62Choosing the MaterialsLabel MaterialMaterial specification The AP 5.4/AP 5.6 can process rolls

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.63Quality criteria Pay attention to the following 3 factors when selecting the quality of label m

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.64Insertion DiagramsThese diagrams display how the material and ribbon moves through the print-er

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.65AP5.4/AP5.6 Dispenser[4] Material and ribbon movement in AP 5.4/AP 5.6 dispenser.1234560

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.66Inserting Label MaterialGeneral NotesAP5.4/AP5.6 StandardInserting a label roll1. Open the fron

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.676. Insert the material as shown [6].¯ Also make sure to push the material around the material s

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.68Inserting Leporello FoldAlternatively to the roller material, you can also use leporello fold (

04/10 Version 5.05-00 USER MANUAL SetupAP 5.4 – AP 5.69AP5.4/AP5.6 with Internal Rewinder1. Insert the label material, see Inserting a label roll  on