Avery Dennison AP5.4 Gen II User Manual download pdf (Page 13)

04/10 Version 5.05-00 USER MANUAL Setup

AP 5.4 – AP 5.6

When the Roll is Empty

End of Material

After the end of the material roll passes by the punch sensor, the following sta-

tus message appears:

« Open the pressure lever and pull the end of the material forwards out of the

printer.

End of Ribbon

Once the end of the ribbon has been wound away and the unwinding mandrel

no longer rotates, the following message will appear:

« Proceed as described under Inserting a New Ribbon Roll  on page 11.

¯ End-of-ribbon detection can be shut off when required, e.g. for direct ther-

mal printing:

« To do this, set SYSTEM PARAMETERS > Foil mode to “Thermal printing”.

For more detailed information on how to set the parameters, see Info Printouts

and Parameters .

Status 5002

Material end

Status 5008

Ribbon end

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

Avery Dennison AP5.4 Gen II User Manual Page 13