Operator’s Handbook ©2013 Avery Dennison Corp. All rig
6. Place the supply guide on the supply holder until it touches the supply. Lock the supply guide. 7. Put the supply tab back. 8. Guide the labels
9. Slide the supply lever next to the supply. Close the supply lever. 10. Close the cover. Getting Started 1-7
Loading Labels – Right Printer 1. Turn on the printer. Press the power button on the side of the printer. 2. Open the cover. 3. Pull on the supply
5. Place a roll of labels (label side up) on the supply holder. 6. Place the outer supply guide on the supply holder and lock it in place. 7. Unloc
9. Guide the labels along the outside edge and into the slot. The printer feeds the supply. Note: Tear a straight edge on the supply before feeding
Printing Labels 2-1 2 PRINTING LABELS This chapter describes how to use the application. print freshness labels. print Use First labels. A
Printing Freshness Labels 1. Turn on the printer. 2. Press the product button of the label to print. 2-2 Operator’s Handbook 3. Select the number
Printing Use First Labels Apply a “Use First” label to any product that needs to be used first. 1. Press the Use First category button on the right s
2-4 Operator’s Handbook
USING EDIT MODE 3 This chapter tells you how to enter and exit Edit Mode. add or remove product buttons. edit product descriptions. Note:
Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Avery Dennison reserves the right to
Entering Edit Mode You can make changes to the product buttons. On the printer, use Edit mode or on your PC use the Edit Utility (see Chapter 5, “Us
Adding and Removing Products You must be in Edit Mode to add or remove product buttons. To add a product button: 1. Press any empty product button.
To remove a product button: 1. Press the product button you want to remove. 2. Press the Clear All button. All existing product information is rem
Exiting Edit Mode To exit Edit Mode: 1. Press the Tools button. 2. Press Exit Edit Mode. Or, press Continue Editing to remain in Edit Mode to make
3-6 Operator’s Handbook
CHANGING PRINTER SETTINGS 4 This chapter tells you how to adjust the supply position, contrast, and print margin. adjust the display settings.
5. Press Print Settings. Use the and buttons to adjust the X Print Position, the and buttons to adjust the Y Print Position and the - and
Formatting the Time and Date To change the way the time/date appear on printed labels: 1. Press the Tools button. 2. Press the Admin button. 3. En
4-4 Operator’s Handbook Changing the Administrator’s Password To change the Administrator’s Password: 1. Press the Tools button. 2. Press the Admi
Adjusting the Network Settings Use the Network Settings screen to view the network settings or set an IP Address. The printer’s current network sett
i ...1-1 ...1-1 ...1-1 ...
To enter an IP Address: You can assign the printer a static IP Address. 1. Select Use a Static IP Address. 2. Touch the text box next to each field
2. Select the check box if you want to automatically synchronize your clock with a Network Time Server. 3. To add a new Network Time Server press A
4-8 Operator’s Handbook
USING THE EDIT UTILITY 5 This chapter tells you how to install the Edit Utility. configure the network settings. upload printer data files
Configuring the Network Settings To communicate with the printer using Ethernet, you must enter your printer’s IP Address within the Edit Utility. S
Editing the Data File 1. Select File, then Open… to edit an existing data (.dat) file. Or, select File, then New to create a new data file from a b
Updating the Product Data File You can use an Ethernet connection to transfer your data file from the computer to your printer. To perform updates u
4. Click Update, then Application Software. 5. Select the 130443 McDonald’s Vxx.cab (“xx” indicates the version number) file you downloaded from th
5-6 Operator’s Handbook
UPDATING YOUR PRINTER 6This chapter tells you how to update your printer’s Product Data file. update your printer’s Application Software. Updat
ii Operator’s Handbook ... 6-1 ... 6-1 ...
5. Press USB Update. 6. Press Update Product Data. If you have more than one Product Data file stored on your USB Flash Drive, select the file yo
Updating Your Application’s Software via USB You can use a USB Flash Drive to transfer updated Application Software from your PC to your printer. Sa
6-4 Operator’s Handbook
CARE & MAINTENANCE 7This chapter tells you how to print diagnostic labels. copy the data file from the printer to a USB Flash Drive. cal
Version Information The Version Information label shows the model number and application part number along with version numbers for the application,
Checkerboard Prints a label to verify that the printhead strobes are working. If the printed sample has fewer lines or no lines, keep the sample and
Calibrating the Touch Screen Calibrate the touch screen so the buttons respond correctly when pressed. 1. Press the Tools button. 2. Press the Admi
Clearing Label Jams To clear a jam: 1. Open the cover. 2. Tear the supply and remove the label roll. 3. Remove the jammed labels. Caution: Do n
7-6 Operator’s Handbook . isplay 6. Replace the platen roller. 7. Snap the cover into place8. Reload the labels. See “Loading Labels” in Chapter
Troubleshooting 8-1 TROUBLESHOOTING This section lists some common printer problems and solutions. Problem Action The screen is off or the printer i
Getting Started 1-1 GETTING STARTED Use the Monarch® FreshMarx® 9417 Food Freshness System for product freshness and to label inventory. Using This
8-2 Operator’s Handbook Code(s) Description 904 – 911 System error. See your System Administrator. SYSTEM ERROR VECTOR ## System error. See your
Specifications A-1 SPECIFICATIONS System Specifications Height: 10.06” (255.55 mm) Width: 11.86" (301.41 mm) Depth: 8.36” (212.24 mm) Weight
28028 0 Avery Dennison170 Monarch LaneMiamisburg, OH 453421-800-543-6650 (In the U.S.A.)1-800-387-4740 (In Canada)www.monarch.com
Printer Overview 1. Cover 6. Power Cord Connection 2. Display 7. Ethernet Port 3. Left Printer 8. USB (Type B) Port 4. Right Printer 9. USB (Ty
Calibrating the Touch Screen Calibrate the touch screen so the buttons respond correctly when pressed. You are prompted to do this the first time you
Setting the Time and Date 1. Press the Tools button. Tools 2. Press the Admin button. 3. Enter the Admin password then press Enter. The default pas
Loading Labels – Left Printer 1. Turn on the printer. Press the power button on the side of the printer. 2. Open the cover. 3. Pull on the supply
Comments to this Manuals