03/10 Rev. 5.04-02 USER MANUAL Advanced Applications
AP 4.4 – AP 5.4 – AP 5.6 – AP 7.t – 64-xx – DPM – PEM – ALX 92x – PM 3000
23
Data transmission with FTP
Requirements
• Suitable printers: All printers listed in the headline, apart from the AP 4.4
(which has no card slot)
• Network connection (see )
• Firmware:
• FTP-client is installed on the host computer. The following FTP-clients are
released for communication with the internal FTP-server:
– Microsoft-Internet Explorer (IE) 5.0, 5.5, 6.0 (OS: Windows NT,
Windows 95)
– WS-FTP Pro 5.0 (OS: Windows NT, Windows 95)
– GNU Midnight Commander 4.6.0 (OS: Linux)
Function description
FTP = File Transfer Protocol
By means of the FTP-client on the host computer, files can be transferred be-
tween host computer and printer. The transmission can take place in both di-
rections. The files are stored in the printer on the internal RAM-disk or on a CF
card plugged into the printers card slot.
Building up a connection
Activating the
FTP server
« Set INTERF.PARAM. > NETWORK PARAM. > FTP server to „enabled“.
Before a connection can be built up, the IP-address of the printer must be
known. This is either provided automatically by a DHCP-server or set manually
at the printer (parameter INTERF.PARAM. > NETWORK PARAM. > IP Addressassign
and INTERF.PARAM. > NETWORK PARAM. > IP Address).
For details refer to Setting the IP Parameters on page 20.
Printer Feature Firmware version
64-xx, DPM, PEM, ALX 92x Gen. 2 3.40
64-xx, DPM, PEM, ALX 92x Gen. 3 5.02
PM 3000 -- 5.03n
AP 5.4, AP 7.t -- 3.0
AP 5.4 Gen II, AP 5.6 MLK 3.34
[Tab. 19] Minimum firmware requirement if it is to apply the FTP client.
Comments to this Manuals