Avery Dennison Label Printer Instruction Manual Page 11
- Page / 116
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Getting Started 1-3
Connecting the Power Cable
The power supply automatically switches between 115V or 230V. Operator settings are
not required.
1. Plug the power cable into the connection located at the back of the printer. Plug the
other end of the cable into a grounded electrical outlet.
Note: Only use a certified power cable with proper voltage for the country of
installation.
2. Turn on the printer. Press ( I ) to turn on and ( O ) to turn off the printer.
Establishing Communications
Before the printer can accept print jobs from the host, you must:
connect the communication cable to the printer (make sure printer is turned off) and to
the host.
set the communication values on the
printer to match those at the host (only
required if you are using the serial port).
Ask yo
ur System Administrator which method
to use for communication with the host:
Serial Port
Optional
Par
allel Port/
Ethernet Card
Power Cable
Connection
Host USB
Type A Port
Seria
l Communication 9 to 9-pin cable
(Part #126716)
Host USB, Device USB
Device USB
Type B Port
Pa
ral
lel Communication (optional)
Ethe
rnet (optional)
Connecting the Communication Cable
Connect the communication cable into the appropriate port. Secure the cable with the
connecting screws (serial) or spring clips (parallel).
If you are communicating with the host through the serial port, make sure the printer's
communication values match those at the host. The printer’s default values are 9600
Baud, 8 bit data frame, 1 stop bit, no parity, and DTR flow control.
- Operator's Handbook 1
- TABLE OF CONTENTS 5
- TOC-iii 7
- GETTING STARTED 9
- Audience 10
- Using this Manual 10
- Getting Started 1-3 11
- Using the Control Panel 12
- Selecting a Function 12
- Exiting a Function 12
- LOADING SUPPLIES 13
- Loading Labels or Tags 14
- Loading Supplies 2-3 15
- Loading Supplies 2-5 17
- Exit Cover 18
- Peel Bar 18
- Platen Roller 18
- Lower Opening 18
- Peel Roller 18
- Loading Supplies 2-7 19
- Cut Liner Here 21
- Using the Optional Tear Bar 22
- LOADING RIBBON 25
- Loading Ribbon 26
- Loading Ribbon 3-3 27
- SETTING SUPPLY OPTIONS 29
- Setting the Supply Type 30
- Setting the Ribbon 31
- Using a High Energy Ribbon 32
- Setting the Speed 33
- Setting the Feed Mode 34
- Setting the Backfeed 35
- BACK 37
- CANCEL 38
- CHANGE CANCE 40
- 10 SET CANCEL 40
- CHANGE BACK 40
- Using Batch Separators 41
- Using Skip Index 42
- Using Rotate Image 43
- Setting the Print Contrast 44
- SETTING COMMUNICATIONS 45
- Setting the Baud Rate 46
- Setting the Word Length 47
- Setting the Stop Bits 48
- Setting the Parity 49
- Setting the Flow Control 50
- SETTING DEFAULTS 53
- Setting the Monetary Sign 54
- Setting the Secondary Sign 55
- CANCE 56
- CHANGE BACK 57
- SET CANCEL 57
- Setting Defaults 6-5 57
- Setting the Power-Up Mode 58
- Changing the Prompt Set 59
- Setting the Numeric Format 60
- Using Flash Storage 61
- Using Flash Memory 62
- SELECT BACK 63
- ENTER BACK 63
- Setting Defaults 6-11 63
- Setting the Image Error Mode 65
- CANCEL 66
- Setting the Error Retry Mode 67
- Memory Guidelines 68
- USING SCRIPTS 69
- Viewing Script Information 70
- Downloading a Script 71
- Enabling a Script 72
- Deleting a Script 73
- Enabling Status Polling 74
- Using Immediate Commands 75
- SETTING RFID OPTIONS 77
- Using RFID Supplies 78
- Using the RFID Setup Menu 78
- Setting the Error Action 81
- PRINTING 83
- Printing a Test Label 84
- On-Demand Mode Printing 84
- Pausing a Batch 85
- Restarting a Batch 85
- Canceling a Paused Batch 85
- Canceling a All Batches 86
- Repeating a Batch 86
- Printing TrueType® Fonts 87
- Licensing Your Fonts 87
- CARE & MAINTENANCE 89
- Cleaning 90
- Care & Maintenance 10-3 91
- Replacing the Printhead 92
- Care & Maintenance 10-5 93
- Factory Set Password 95
- ENTER BACK 96
- Checking Supply Quality 97
- Using Password Protection 98
- Service Diagnostics 98
- Troubleshooting 99
- Error Messages 100
- Common Errors 100
- SPECIFICATIONS 103
- Supplies 104
- Ribbon Specification 104
- Cable Pinouts 105
- ACCESSORIES & OPTIONS 107
- GLOSSARY 109
- G-2 Glossary 110
- Index I-1 111
- I-2 Index 112
- Index I-3 113
- 28028 28028 116
Related products and manuals for Label printers Avery Dennison Label Printer
(11 pages)
(46 pages)© 2020, manymanuals.com. All rights reserved. | 0.597 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals