Avery Dennison Label Printer Instruction Manual download pdf (Page 37)

Setting the Supply Position

This function adjusts the machine to print at the vertical 0,0 point on the supply. Adjust

the supply in or out to easily remove the supply.

The adjustments are in dots (0.0049 inch).

 Increase the number to feed more supply out of the chute.

 Decrease the number to feed less supply out of the chute.

Note: The supply position adjustment should only be made on initial printer setup. For

format adjustments, change the print position.

This option takes effect when you print the next label or tag. Changing supply position

may also affect print position.

1. Press  or  until you see Supply Pos.

CHANGE CANCEL

← Supply Pos →

POSITIONING

2. Press CH

ANGE to highlight the supply positioning options. The current setting is

shown.

3. Press  or  to increment/decrement the supply position.

1 SET CANCEL

[-300/300] 0

Supply Pos

POSITIONING

Note: Pressi

ng the left function button changes the increment/decrement amount

(changes by 1, 10, or 100).

4. When you see the supply position you need, press SET to save the change. Press

CANCEL to leave the supply position unchanged.

5. Press BACK until you return to the Home/Online screen.

POSITIONING

← Supply Pos →

CHANGE BACK

Setting Supply Options 4-9

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 115 116

No comments

Avery Dennison Label Printer Instruction Manual Page 37