Avery Dennison SNAP 600 User Manual download pdf (Page 76)

User’s Manual—SNAP™ 600 Printer

11.0 Mechanical Troubleshooting

11.1 Stock

Problem Probable Cause Corrective Action

Stock will not roll

smoothly or the stock

jumps.

1) Web guides are incorrectly

adjusted.

1) Be sure stock roll is as flat as possible and

does not extend over core.

2) Adjust web guides to touch stock roll, but

do not pinch the roll.

Stock does not pull

smoothly through print

head module.

1) Web guides are too tight. 1) Adjust web guides to touch outer edges of

stock with the minimum pressure required.

Stock jams in bridge

blade rollers or knife

area.

1) Knife not cutting the full width

of stock.

1) Refer to section 6.4, Knife Shear

Adjustment.

2) Nip rollers are not turning. 1) Be sure the nip roller is free to rotate and

moves easily in the bearing slots. Check for

a loose drive gear.

IF THE RECOMMENDED CORRECTIVE ACTIONS DO NOT

RESOLVE THE PROBLEM (S), CONTACT YOUR LOCAL

AVERY DENNISON REPRESENTATIVE.



1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 140 141

No comments

Avery Dennison SNAP 600 User Manual Page 76